Projekt Pegasus Forum

Es kam immer wieder mal vor (so auch bei mir), dass die falsche Firmware aufgespielt wurde auf das MMDVM Board.

Nun hat Florian DF2ET eine Funktion ins Update-Script eingebaut welches dass eingebaute MMDVM-Board anzeigt.

[Bild: MMDVM-Board-Firmware-Update.png]

Grüße , Joachim

Befehle für Copy / Paste

SSH-Login:

Code:
Benutzer: pi-star

Passwort: raspberry

Code:
sudo pistar-mmdvmhshatflash

Ausgabe:

Code:
 pi-star@pi-star(rw):~$ sudo pistar-mmdvmhshatflash    

This tool is used to flash your MMDVM_HS Hat Modem                                   

to use the command, you will need to pass the name of your modem,                    

please choose form the list below...                                                 

To flash HS_HAT (14.7456MHz TCXO) connected to GPIO, run: pistar-mmdvmhshatflash hs_h

at                                                                                   

To flash HS_HAT (12.2880MHz TCXO) connected to GPIO, run: pistar-mmdvmhshatflash hs_h

at-12mhz                                                                             

To flash HS_DUAL_HAT (14.7456MHz TCXO) connected to GPIO, run: pistar-mmdvmhshatflash

 hs_dual_hat                                                                         

To flash HS_DUAL_HAT (12.2880MHz TCXO) connected to GPIO, run: pistar-mmdvmhshatflash

 hs_dual_hat-12mhz                                                                   

To flash ZumSPOT devices by please use pistar-zumspotflash                           

To flash MMDVM_HS Nano Hat devices please use pistar-vyehsflash                      

To flash your BD7KLE/BG3MDO devices please use pistar-mdoflash

Befehle einzeln:

! sudo bitte davor eingeben !

Code:
To flash HS_HAT (14.7456MHz TCXO) connected to GPIO, run: pistar-mmdvmhshatflash hs_hat

Code:
To flash HS_HAT (12.2880MHz TCXO) connected to GPIO, run: pistar-mmdvmhshatflash hs_hat-12mhz

Code:
To flash HS_DUAL_HAT (14.7456MHz TCXO) connected to GPIO, run: pistar-mmdvmhshatflashhs_dual_hat 

Code:
To flash HS_DUAL_HAT (12.2880MHz TCXO) connected to GPIO, run: pistar-mmdvmhshatflashhs_dual_hat-12mhz 

Code:
To flash ZumSPOT devices by please use pistar-zumspotflash

Code:
To flash MMDVM_HS Nano Hat devices please use pistar-vyehsflash

Code:
To flash your BD7KLE/BG3MDO devices please use pistar-mdoflash

73 de DO5SPA

jhummel

DO5SPA